Swage Blocks . com
   HOME   
   Cone Gallery   
   Links   
   Contact   

2 dos hardie hole cones

Two Hardie Hole Cones

These are small cones for use in the vise, hardie hole, swage block or stake plate. Besides truing rings these small cones are often used when shaping scrolls and other free form curves. the large cone is cast ductile iron, the smaller one forged steel.

Sizes, 11.5" (292 mm) and 6.5" ( 165 mm) with 1" (25mm) shanks. Sold by Kayne and Son (Blacksmiths Depot).

Graphic by Jock Dempsey




   Cone Gallery   


HOME |  GALLERY |  TYPE DEFINITIONS |  AVAILABLE TODAY |  USES |  LINKS |  CONTACT  ]


Copyright © 2009

page Counter